Stronger and more flexible screed without cracks
Eliminates
cracks up to
0 %
One roll
weighs just
0 kg
One roll
covers
0 m2
Easy transport
No truck required for transport.
Easy
cutting
Vertex grid can be cut with either scissors or sharp blade.
Easy installation
Easily installed around complicated floor shapes.
Light-
weight
What is heavier?
m2 of metal or m2 of Vertex Grid
Range
Reinforces all types of screed and other non structural parts of the building.
Choose the optimal fabric density.
G120
Roll [m]
1 × 50Square size [mm]
40 x 40Initial tensile strength [t]
3,0/3,0Weight [g/m2]
145Recommended screed type
Traditional dry screeds with particle size up to 7 mm
G96
Roll [m]
1 × 50Square size [mm]
25 x 25Initial tensile strength [t]
2,5/2,0Weight [g/m2]
130Recommended screed type
Self-levelling screeds or traditional ones with fine particle size
R108
Roll [m]
1 × 50Square size [mm]
9 x 9Initial tensile strength [t]
4,2/3,7Weight [g/m2]
140Recommended screed type
All types of screeds with very fine particle size
Certificates
We work honestly and carefully. Certificates from Czech TZUS and French CSTB ensure the highest quality and strict production control for all Vertex Grid products.
Enquiries
+44 7803 956487
Frequently Asked Questions
What range of screed thickness is Vertex suitable for?
A: Vertex Grid is suitable for use in all traditional and flowing screeds, typically 30 mm to 100 mm.
Can Vertex Grid be used in self levelling screeds?
A: Vertex Grid is an easy to install solution for the reinforcement of self levelling screeds. Simply apply self levelling screed directly onto Vertex Grid and it will position itself for optimum performance typically 10 – 15mm from the substrate.
Does Vertex Grid influence underfloor heating performance?
A: No, there is no impact on the performance of the underfloor heating.
Can Vertex Grid be used outdoors?
A: Vertex Grid is not recommended for long term reinforcement outdoors. It eliminates cracks during the drying process, but it cannot serve as the long term reinforcement.
Do you want to know more about Vertex Grid?
Type your e-mail address and subscribe for newsletters.
Saint-Gobain Adfors cz s.r.o.
Address: Sokolovská 106, 570 01 Litomyšl
Phone: +420 461 651 111
Identification number: 000 12 661
VAT number: CZ 000 12 661
SAINT-GOBAIN ADFORS CZ s.r.o. registered in Commercial Register held by Court in Hradec Kralove, Section C, Insert 22416, registered office
Our brands
2015–2017 SAINT-GOBAIN ADFORS CZ s.r.o. All rights reserved.